Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 182 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8908-Q1EVM: failed to connect to device MSP430G2553

Cherry Zhou
Mastermind 22235 points
Part Number: DRV8908-Q1EVM
Other Parts Discussed in Thread: MSP430G2553

Hi team,

Here's an issue from the customer may need your help:

When the application board is connected to the GUI, it will alert "failed to connect to device MSP430G2553".

And the status LED on the EVM board does not light when USB is connected, is the MSP430 damaged? 

Thanks.

Best Regards,

Cherry