MCT8316Z-Q1: Can the MCT8316 family only connect an analogue Hall?

Cherry Zhou

Part Number: MCT8316Z-Q1

Hi team,

The MCT8316 family is currently connected to an analogue volume Hall (all four-pin). Is it possible to connect a Hall of switching volume? Because the BLDC customers are using today is a three-pin Hall of switching volume.

Best Regards,

Cherry

over 2 years ago

0 Vishnu Balaraj over 2 years ago

TI__Mastermind 24415 points

Hi Cherry,

Yes, MCT8316Z-Q1 supports digital hall inputs as well.

Regards,

Vishnu

0 Cherry Zhou over 2 years ago in reply to Vishnu Balaraj

TI__Mastermind 22235 points

Hi Vishnu,

Thanks for your support.

Is that digital hall connected to the positive or negative side of the 8316 analogue hall interface?

Thanks and regards,

Cherry

0 Vishnu Balaraj over 2 years ago in reply to Cherry Zhou

TI__Mastermind 24415 points

Connect hall sensors to only HPx.

Motor drivers

Motor drivers forum

MCT8316Z-Q1: Can the MCT8316 family only connect an analogue Hall?