Hi All,
I have a question about DRV8804.
When the overcurrent protection operates, does the FET turn off only for the output pin where the overcurrent flows?
Or do all FETs turn off?
Best Regards,
Ishiwata
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi All,
I have a question about DRV8804.
When the overcurrent protection operates, does the FET turn off only for the output pin where the overcurrent flows?
Or do all FETs turn off?
Best Regards,
Ishiwata
Hello Ishiwata-san,
Tripping the overcurrent protection will disable all the FETs.
Please see section 7.3.4.1 in the datasheet for more detail.
Thank you!