MCT8329A: How do I launch the MCT8329A configuration utility?

Hi Phil,

Can you share more details on what ou are trying to do with the MSP430FR2355 Firmware? This is the firmware for the MSP430FR2355 on our MCT8329EVM. EVM comes with the firmware pre-programmed. If you are looking to run your motor using the MCT8329EVM then you will have to download the MCT8329 GUI (link below). Please follow the instructions in the MCT8329EVM User's guide.  

MCT8329 GUI - https://dev.ti.com/gallery/view/BLDC/MCT8329A_GUI/ver/1.1.2/

MCT8329EVM User's guide - https://www.ti.com/lit/pdf/sllu359

Regards,

Vishnu

OK I thought the MCT8329 EVAL board came with the processor unprogrammed but I comes programmed so I don't need to program it now. 

I am trying to use the GUI utility but can't make progress.  the on-line version doesn't stay connected/ doesn't work at all. 

We were able to download the GUI and had it working but after we closed it, it would never reopen. 

We are trying to re-down load and reinstall it but the GCruntime utility will not download.  It downloads for about 3.5mins then fails with "Network error" but there is not network error. 

Is there another way to download the GUI and GCruntime?? Maybe through a third party? Can I order it on a  flash drive?

-Phil

Thank for trying to help Visnu.  We got it to load, but we don't know what we did, we just tried several times, uninstall / reinstalled once.  We didn't change our network security settings at all. We have it running on two machine now, one desktop and one laptop.

Good to know that the issue got resolved.