Other Parts Discussed in Thread: LAUNCHXL2-RM57L,
Hello,
I am currently facing a challenge while attempting to reading registers of the DRV3205-Q1(EVM) using the LAUNCHXL2-RM57L development board over SPI. Despite diligently following the instructions outlined in the Full Datasheet, I encounter a situation where the device returns a value of 0xFF instead of the expected response.
It is worth mentioning that I have successfully operated a BLDC motor using the DRV3205-Q1 on our custom board, which leads me to believe that I am capable of activating the device by writing to the appropriate registers. However, my struggle lies in the inability to read the registers.
Given the circumstances, I would greatly appreciate your expert guidance in resolving this issue. If you could provide me with comprehensive instructions or any valuable insights that may assist me in both successfully reading and writing to the registers of the DRV3205 via SPI, it would be immensely beneficial.
Thank you for your attention to this matter. I look forward to your response and guidance.
Best regards,
Taygun Tuğran
