Hi All,
I have a question about the DRV8813.
What is the minimum pulse width that can be input to the nRESET pin?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi All,
I have a question about the DRV8813.
What is the minimum pulse width that can be input to the nRESET pin?
Hi Takahashi-san,
Thank you for the E2E post. Is your question related to this post? https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1235600/drv8813-input-time-after-reset/4669284?tisearch=e2e-sitesearch&keymatch=minimum%252520pulse%252520for%252520nSLEEP%252520reset%252520DRV8813#4669284.
If it is not you can stull use the same information - "The nRESET minimum time spec is around 20us to ensure the fault is clear and driver is back in operation.".
Regards, Murugavel