MCT8329A: Schematic Review

CHO SR

Genius 3415 points

Part Number: MCT8329A

Hi,

The customer applies MCT8329A to control the air gun motor.

Please review the schematic.

Delete.

Target RPM : 65,000

Operating Voltage : 11.1V(3cell), 14.8V(4cell)

0 Joshua Horlander Cruz over 2 years ago

Hi Cho,

Please allow me some time review this schematic. I will aim to get back to you by next Wednesday at the latest.

Regards,

Joshua

0 CHO SR over 2 years ago in reply to Joshua Horlander Cruz

Genius 3415 points

Hi Joshua,

Thank you. I'll be waiting.

0 Joshua Horlander Cruz over 2 years ago in reply to CHO SR

Hi Cho,

Please see the suggestions below:

Please tie the DRVOFF pin to GND if you will not be using it
Please connect the VREG pin to AVDD or external 3-5.5V
Please connect the SN pin to the C-SEN-N net and the SP pin to the C-SEN-P net. Please see the SN and SP pin descriptions near the bottom of page 4 of the datasheet.
For the capacitors connected between PVDD and GND we recommend using capacitors with a voltage rating of at least 2x greater than the typical voltage that the capacitors will be exposed to.

Regards,

Joshua

Motor drivers forum