BOOSTXL-DRV8305EVM: Dimensional information for BOOSTXL-DRV8305EVM

Conor

Hi,

I'm looking for a document with dimensional information for BOOSTXL-DRV8305EVM. Do you have any information?
I would like to use it as a reference when replicating the EVM circuit.

Thanks,

Conor

over 2 years ago

0 Eli Sorenti-Burns over 2 years ago

TI__Intellectual 1350 points

Hi Connor,

Thank you for posting on E2E! The following link should provide some useful information on the dimensional information of the EVM: BOOSTXL-DRV8305EVM Evaluation board | TI.com. The Design Files section should provide you with a good reference layout and schematic for the EVM. Please let me know if this is what you are looking for.

Best,

Eli

0 Conor over 2 years ago in reply to Eli Sorenti-Burns

Guru 12205 points

Hi Eli,

I found some information about the layout and schematics. However, I couldn't find any information about the dimensions of the EVM (length x width, etc.).
Do you have any advice for me?

Thanks,

Conor

0 Eli Sorenti-Burns over 2 years ago in reply to Conor

TI__Intellectual 1350 points

Hi Connor,

I measured 57mm by 52mm for the board dimensions of the EVM. You can measure the board yourself by opening up the layout included in the design files I pointed out in my previous message. From there go to Reports --> Measure Distance (or hit Cntrl+M) and then you can measure any dimensions you'd like. Hope this helps.

Best,

Eli

0 Eli Sorenti-Burns over 2 years ago in reply to Eli Sorenti-Burns

TI__Intellectual 1350 points

Hi Connor,

Thank you for posting on E2E! Please let me know if this solved your issue by resolving the thread. If you have any other questions, feel free to create another E2E post.

Best,

Eli

Motor drivers

Motor drivers forum

BOOSTXL-DRV8305EVM: Dimensional information for BOOSTXL-DRV8305EVM