DRV8343S-Q1EVM: Programing EVM for independent control

Hey Richard,

 We will aim to take a look at this and plan to provide feedback early next week.

Best,
Akshay

Hi Richard,

Thank you for posting on E2E! My advice is to verify your include paths to ensure they are all correct. You can look at the following threads for more information on what may have caused this error: 

https://e2e.ti.com/support/tools/ccs/f/81/t/549949?Cannot-access-driverlib-h

https://e2e.ti.com/support/tools/ccs/f/81/t/619282

Best,

Eli

Hey this is your demo FW for the DRV8320. I have no idea where these files are. This is a default install. Can you point me to the location of the files? 

Hi Richard,

I'm going to align internally with my team on this. In the meantime, can you please confirm that you have followed all the steps outlined in the DRV8343H-Q1EVM and DRV8343S-Q1EVM User's Guide (Rev. B) (ti.com) (Section 2.3.2 and 2.3.3)?

Best,

Eli

Hi Richard,

Thank you for your patience. I've downloaded the FW code myself and had no issues compiling it. Which project is throwing this error in the FW file (the independent drive, trap sensored, or trap sensorless)? Can you show me your file directory on the left of your CCS window?

Best,

Eli

As the title suggests, I was trying to compile "independent control". What version of the compiler and IDE are you using?

Hi Richard,

Thank you for the clarification.

Eli Sorenti-Burns said:

Can you show me your file directory on the left of your CCS window?

Can you please send an image of this with everything expanded?

richard Johnson said:

What version of the compiler and IDE are you using?

I am using Code Composer Studio version 12.3.0. 

Hope this helps.

Best,

Eli