This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
DRV8350 Datasheet specifies 47nF, VDRAIN-rated between CPL and CPH.
Is it ok to use 100nF? What’s the range of allowed capacitance values here?
Hey Frank,
I recommend sticking with the DS recommendation of 47nF cap on CPH-CPL as this was the value used to predict charge pump behavior and values shown in DS.
Having larger than recommended value, can take longer to charge.
Best,
Akshay