Tool/software:
Hello team
I need to know values for R1 and R6 in Fig.35; for accurate calculation of current-to-voltage gain due to application with series resistor in both input (SPx, SNx) and output (SOx) sides
Thanks in advance
Bye
Marco F.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hello team
I need to know values for R1 and R6 in Fig.35; for accurate calculation of current-to-voltage gain due to application with series resistor in both input (SPx, SNx) and output (SOx) sides
Thanks in advance
Bye
Marco F.
Hi Marco,
R1 is around 10kOhm while R6 is negligible. You can also refer to the datasheet section 8.3.4.1 equation 3 for the current calculation from the SOx output voltage.
Best,
Davis
Thanks for info
Can you refer to some line in datasheet or application note of DRV8323? Or other more or less equivalent P/N?
Hi Marco,
There is another diagram of the CSA in figure 41 of the datasheet. I believe this is also a future datasheet revision we will be making to the diagram you previously sent.
Best,
Davis