SW3 from controlCARD Piccolo F28035 (DRV8412-C2-KIT)

Long Wang

Intellectual 720 points

Other Parts Discussed in Thread: CONTROLSUITE

Hi everyone,

I just wanna make sure, what I understood is correct.

If the switcher SW3 at "on" (down position), the controlCARD can be reflashed from CCS.

If SW3 at "off" (up position), the controlCARD can not be reflashed.

But where can I find the description about SW3? I got this only in this forum.

AND in all the pictures about controlCARD, SW3 is always at "on", this confused me already for a while.

Hope someone can clear this point for me.

Long

over 13 years ago

0 LT Thomas over 13 years ago

TI__Intellectual 880 points

Long,

If you go in your directory to C:\TI\controlSUITE\development_kits\~controlCARDs\CC2803xISOHWdevPkg There is an Infosheet with the description along with the Schematic that shows what exactly is going on.

0 Long Wang over 13 years ago in reply to LT Thomas

Intellectual 720 points

Thomas,

Thanks again, it is clear now.

Long

Motor drivers

Motor drivers forum

SW3 from controlCARD Piccolo F28035 (DRV8412-C2-KIT)