Tool/software:
Dear TI Team,
Could you please provide how much current we draw/load from then VCP pin DRV8899.
We are planning to use VCP pin to supply the gate driver of reverse polarity protection N-CH MOSFET.
Thanks in advance.
Rahil.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dear TI Team,
Could you please provide how much current we draw/load from then VCP pin DRV8899.
We are planning to use VCP pin to supply the gate driver of reverse polarity protection N-CH MOSFET.
Thanks in advance.
Rahil.
Hi Rahil,
Thank you for reaching out to us. The allowable typical current for VCP is about 1mA.
Please let me know if you have any more questions.
Best regards,
Mojtaba.
Dear Mojtaba,
Thanks for the quick response.
Kindly share the characteristics curve for VCP output current Vs temperature change.
Best regards,
Rahil
Hi Rahil,
The VCP output current Vs temperature is not reported in the datasheet. This information is not available but the current capacity shouldn't vary by temperature changes.
Best regards,
Mojtaba.