Hi,
I have a question about DRV8412DDW Evaluation Board REV. D. I'm going to buy it to drive a stepper motor, but I would like to know if there is a current sensing circuit integrated in the board to measure windings current?
Thank you!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Samuel,
Unfortunately, we do not have this circuitry on the DRV8412DDW board.
If you need this along with a MCU and all the code needed (including a GUI for the PC), then please take a look at the following:
http://www.ti.com/tool/drv8412-c2-kit