• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 575 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

InstaSpin BLDC GUI

khaled shokry
Prodigy 240 points

Other Parts Discussed in Thread: CONTROLSUITE

Hello,

I downloaded my own software on the flash for piccolo F28035 (DRV8302-HC-C2-Kit), How can I download the software to work with InstaSPIN GUI again?

Did I destroy it and no chance to download it again from somewhere?

Thanks

  • 0
    TI__Guru 55795 points

    You can find all the original firmare, GUI, and hardware files in ControlSUITE.  Link below:

    http://www.ti.com/tool/controlsuite

     

  • 0 in reply to Ryan Kehr
    Prodigy 30 points

    Hi,

    I have DRV8312-430FR-KIT Motor Control development kit and I'm unable to run instaspin_bldc.exe on the included DVD.

    I have verified the prerequisities, tried to run it as Administrator, tried to copy the whole DVD content to hard drive and run, tried to run it from windows command line to see if there's any error message, but could get neither the GUI nor any error message shown.

    I also see no related process in Windows Task Manager. When instaspin_bldc.exe is run from the command line, it terminates immediately.

    I'm running Windows 7 32-bit. I already had FTDI Virtual COM Port driver installed before.

    Please advise,

    Andrej