DRV8432 Inrush Resistors Placement?

John Cole

Hello,

Per advice from Ryan, we're going to add some 0603 5 ohm resistors on our GVDD_X pins. ( http://e2e.ti.com/support/applications/motor_drivers/f/38/p/272693/956123.aspx )

I just want to make sure I place them correctly; here's a small snapshot of our schematic.

0 Wilson Zuo over 12 years ago

Hi John

Looks good. But my suggestion is to have a real test before goes to the new PCB making.

A handly mod on current board can make it testable immediately. I think it should be easy to mod.

Hardware is always verified by the real test.

Thanks.

Wilson

Motor Application Team

0 John Cole over 12 years ago in reply to Wilson Zuo

Wilson,

Thank you so much for your help! Very much appreciated!

Best,

John

Motor drivers forum