We have a DRV 8303EVM board , which we want to interface to external processor ARM . ARM should control the inputs to DRV8303 IC, kindly help us on the same.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We have a DRV 8303EVM board , which we want to interface to external processor ARM . ARM should control the inputs to DRV8303 IC, kindly help us on the same.
Hi Takalkar
You can remove all the resistor packs related to the onboard MCU, and supply signals through J1 and other related connectors.
Please refer to the schematic of the EVM. And you can find all the source designer files in the EVM page on hardware section.
http://www.ti.com/tool/DRV8303EVM
Best regards,