• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 393 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How Hall effect sensor of bldc motor can be used as input to TI tool kit DRV8301-69M? What are the steps involved?

Anjana Pathak
Prodigy 60 points
Other Parts Discussed in Thread: DRV8301

Hi,I am using TI tool kit DRV8301-69M. Please tell me how do I interface Hall inputs and read its feed back.

  • 0
    TI__Guru** 114905 points

    Hi Anjana,

    First, I am moving your post back to the Motor Drivers Forum. The Hall Effect Sensors Forum is intended for questions about the DRV5xxx series devices.

    Next, to begin answering your question. Please refer to the following links:

    LINK1

    LINK2

    The information about the DRV8301 kits generally can be found either in the Motor Drivers Forum or the C2000 forum. Most of the information is in the C2000 forum because the experts on the code reside there.