DRV595

Marc Durrenberger

Other Parts Discussed in Thread: DRV595

Is it possible to connect two synchronized DRV595 devices in parallel (may be after the output filter) to increase the total current. I need 5-6 Amps.

over 10 years ago

0 Rick Duncan over 10 years ago

TI__Guru** 114905 points

Hi Marc,

Our expert on this device has been notified and should reply soon.

0 Don Dapkus over 10 years ago in reply to Rick Duncan

TI__Guru**** 189401 points

Hi, Marc,

This is not a mode that we have verified, but it should work if you do it after the filter.

If you decide to try it, let us know how it worked for you.

-d2

0 Manisha George over 8 years ago in reply to Don Dapkus

Prodigy 70 points

Hello DON

I am also looking for same case where I want to connect two synchronized DRV595 in parallel to fetch more current. Is there any application note available now?

Thanks and Regards

Manisha George

0 Don Dapkus over 8 years ago in reply to Manisha George

TI__Guru**** 189401 points

Hi, Manisha,

No further information is available.

Motor drivers

Motor drivers forum

DRV595