PMSM specification sheet

jason manbodh

Hello everyone, I cant seem to find the Spec sheet for the motor, DT4260-24-055-04. Can someone please post it. Thank you.

over 10 years ago

0 Nicholas Oborny over 10 years ago

TI__Mastermind 21320 points

Hi Jason,

https://e2e.ti.com/support/microcontrollers/tiva_arm/f/908/t/259683

You can refer to his post. The Telco motor is an equivalent for the BLY172S-24V-4000.

Unfortunately we do not have a spec to share.

0 jason manbodh over 10 years ago in reply to Nicholas Oborny

Intellectual 470 points

Thank you Nick

0 jason manbodh over 9 years ago in reply to Nicholas Oborny

Intellectual 470 points

Good day Nick, I got the spec sheet for the BLY172S-24V-4000 motor, however, it does not give any information on how the magnets are arranged. on the rotor. I would like to know if it has surface-mounted magnets.

Thank you

0 Nicholas Oborny over 9 years ago in reply to jason manbodh

TI__Mastermind 21320 points

Jason,

Do you mean how the magnets are mounted or whether the motor has magnets at all?

0 jason manbodh over 9 years ago in reply to Nicholas Oborny

Intellectual 470 points

I am modeling a PMSM and i am using the parameters of the BLY172S-24V-4000 motor. I want to know how the magnets are mounted.

Thank you

0 Nicholas Oborny over 9 years ago in reply to jason manbodh

TI__Mastermind 21320 points

Jason,

You may have to follow up with Anaheim Automation application support for this. I do not have this information.

0 jason manbodh over 9 years ago in reply to Nicholas Oborny

Intellectual 470 points

ok will do. thank you

Motor drivers

Motor drivers forum

PMSM specification sheet