Stepper motor with CC3200 LaunchXL

Hi Vamsi

Could you give more info of your stepper spec/application? VM voltage/ current level / need micro-stepping ?

We have lots of stepper driver which is very easy to control. Give you an example such as DRV8880. All left is to give the STEP/DIR to the device for the stepper running.

Best regards,

I have a driver with me. All I am looking for is a library to work with and a few examples if possible.
Can I use the ones that come with Arduino?

Hi Vamsi,

I don't think there is any library about this since the interface to stepper driver is easy and sepeciafied by application. If you are looking for some acceleration/decelaration control, one way is you can refer to lots of our DRV8x EVM/GUI firmware which are all online downloadable.

BTW, what is your driver and the application, if you need, we can give you comparison and good recommendation :)

Best regards,

As mentioned in my previous post, I am working on Energia.
So I thought like many other libraries Energia has, one for stepper can also be found somewhere. But I understand it is easy to implement stepper control without any library. Thanks for the information. I will try.

I am using TB6560 stepper control with NEMA 23 motor.

Hi,

One more question. Can I not use the library available on github like this one?

I am using CC3200 with Energia.

Alternatively post this at SimpleLink Forum to get more expert advice.

- kel