Encoder interface on DRV 8312 kit

jason manbodh

Other Parts Discussed in Thread: CONTROLSUITE, DRV8312

Good morning everyone, i am using the DRV 8312-C2 motor control kit and i would like it know the pin description of the encoder interface.

Which pins represent the channel A, B and index?

Thank you

-Jason

over 9 years ago

0 Rick Duncan over 9 years ago

TI__Guru** 114905 points

Hi Jason,

Have you looked at the schematic in controlSUITE? Open controlSUITE, then perform a search for DRV8312.

You will see a Hardware Development Package folder which contains the schematic.

0 jason manbodh over 9 years ago in reply to Rick Duncan

Intellectual 470 points

thank you..i got it

Motor drivers

Motor drivers forum

Encoder interface on DRV 8312 kit