DRV10983 BLDC Motor Driver

Binoy Johnson

Other Parts Discussed in Thread: DRV10983

I am using TI BLDC Celing Fan board. http://www.ti.com/tool/TIDA-00386

Motor is not rotating in my case. Is there any configuration is required through I2C for analog speed controlling?. please give an answer ASAP

over 9 years ago

0 Rick Duncan over 9 years ago

TI__Guru** 114905 points

Hi Binoy,

Our experts have been notified and should reply soon.

0 Krushal over 9 years ago in reply to Rick Duncan

TI__Expert 3010 points

Hi Binoy,

DRV10983 needs to be tuned (different register setting needs configuration) to work with different motors. There is tuning guide and GUI available to help tune parameters

GUI is under software section : http://www.ti.com/tool/drv10983evm

0 Binoy Johnson over 9 years ago in reply to Rick Duncan

Prodigy 30 points

Thanks

0 Binoy Johnson over 9 years ago in reply to Krushal

Prodigy 30 points

i have made it working thanks for the support.

Motor drivers

Motor drivers forum

DRV10983 BLDC Motor Driver