• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 31 subscribers
  • Views 2399 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2700EVM: DRV2700EVM Software Crashes and does not connect

Vlad Revici9
Prodigy 195 points
Part Number: DRV2700EVM

Hi,

I am having a problem when setting up the Piezo Control Console with the the EVM.

Once it connects when pressing 'Console' top left it crashes.

Can you please let me know what the issue could be and how it can be solved?

Thank you.

  • 0
    TI__Genius 10512 points
    Hi Vlad,

    Let me get our software expert to look at this. What version of Windows are you using? We only support Windows 7 for now.
  • 0 in reply to Kelly Griffin
    Prodigy 195 points
    Hi,

    I have tried it on both windows 7 and windows 8 and none of them work.

    Thanks,
    Vlad
  • 0 in reply to Vlad Revici9
    TI__Prodigy 590 points
    Hey Vlad,

    last time I had this problem I solved it by updating the firmware of the EVM. Here are some instructions on how to do it:

    1. Unplug the cable from the computer USB port
    2. Open the Piezo Control Console
    3. Go to Help -> Firmware Update
    4. Press the button SW1 (the white one in the top left corner), keep it pressed and plug in the USB cable to the computer port
    5. Press Scan Device (after that you can release the button)
    6. Go to Open FW and choose available firmware (should be DRV2700EVM_v1p7)
    7. Press update
    8. Unplug the USB cable from the computer, restart the program and try it again

    Let me know how it went!

    Best regards,
    Marko