DRV10983: register programming

Vitalii Chernobaii

Prodigy 40 points

Part Number: DRV10983

Dear Team,

Where I find time charts and a guide to programming registers (how to read and write registers) for DRV10983?

I connected 10983 with I2C interface from external controller

how can I read and write registers of 10983 from my controller without

DRV10983 EVM GUI

If you can give an example of reading and writing registers & EEPROM

Thanks

Vitalii

over 8 years ago

0 Cole Macias over 8 years ago

TI__Mastermind 18900 points

Hello Vitalii,

Please refer to the Programming Guide for the DRV10983 application report and User's Guide for the TIDA-01373: EEPROM Programming Tool for more information about reading and writing registers for the DRV10983.

For context, the DRV10983 can be programmed via I2C using your controller. Since the I2C is a common communication protocol, our device complies with the original specification (note: note fast mode). Some basic information about I2C can be found here and here. The slave address of the DRV10983 is 0b101 0010 or 0x52.

Best,

-Cole

0 Vitalii Chernobaii over 8 years ago in reply to Cole Macias

Prodigy 40 points

This is very excellent reply

Thanks

Vitalii

Motor drivers

Motor drivers forum

DRV10983: register programming