sensorless BLDC motor

Nasri touati

Other Parts Discussed in Thread: CONTROLSUITE

hello,

My last project " Control a Brushless Motor using FPGA" works very well. My new project is "Control a Sensorless Brushless Motor using FPGA". Do you know someone who has some knowledge on this subject?? Thank you so much in advance for your help.

over 6 years ago

0 Yanming Luo over 6 years ago

TI__Guru** 113020 points

Hi sir,

You may use a Microcontroller to implement your project, that's more flexible, you can control a sensorless BLDC motor using trapezoidal or sinusoidal mode. If you would, you may download C2000 controlSUITE from TI website, and you could find some example projects that can be debugged on TI EVM Kits, it's easy for you to do further improvement.

0 Yanming Luo over 6 years ago in reply to Yanming Luo

TI__Guru** 113020 points

Just wanted to check in and see if there is any update from your side. Please let me know if you have any questions. We would like to close this thread if no any further questions. Thanks.

0 Nasri touati over 6 years ago in reply to Yanming Luo

Prodigy 150 points

the answer dosen't help me,thank's

0 Yanming Luo over 6 years ago in reply to Nasri touati

TI__Guru** 113020 points

OK. Please let me know if you want to use a C2000 controller on your BLDC control.

0 Nasri touati over 6 years ago in reply to Yanming Luo

Prodigy 150 points

hi, in my project i must use the board of FPGA (DE0-nano) ,my project is based on control with FPGA not with C2000 controller,thank you

0 Yanming Luo over 6 years ago in reply to Nasri touati

TI__Guru** 113020 points

Understand. Please let me know if you have any further questions on motor control using C2000. We would like to close this thread if no any further questions. Thanks.

Motor drivers

Motor drivers forum

sensorless BLDC motor