• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 601 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2605L: Resolution, bandwidth, output swing limitations

Jon Key
Intellectual 920 points
Part Number: DRV2605L


Hello,

I have the following questions about DRV2605L:

- What is the resolution of the PWM, analog, and audio input modes?

- What is the output bandwidth of the DRV2605L driver?

- What is the output swing limitation of the driver? 

Thank you,

Jon

  • 0
    TI__Genius 10702 points
    Hi Jon,

    1. The resolution can be with 7-bit or 8-bit depending on the setting for BIDRI_INPUT (register 0x1c).
    2. In closed-loop mode, the output will be at the f0 of the LRA. In open-loop mode, there is a 7-bit register (0x20) to set the frequency that is based on this equation: LRA period (us) = OL_LRA_PERIOD[6:0] × 98.46 μs. You can convert to frequency. This device was designed for the haptic frequency range ~125-500Hz.
    3. The maximum output voltage is approximately VDD-0.3V.
  • 0 in reply to Kelly Griffin
    TI__Genius 10702 points
    Hi Jon,

    Feel free to post any additional questions to the forum. I will close this post for now.