CCS/DRV8703-Q1EVM: DRV8703-Q1EVM

HI,

1.While connecting DRV8703 q1 evm board ,'NO USB FET was FOUND ' like this error was coming..i tried a lot methods which are suggested in forum and also in google but it was not solved.Please tell possible solution ( for windows 10 and CCS8.1.0).

2. Please share exact user guide or manual for DRV8703 q1 evm..where all status led indication purpose details , jumper setting cases and also give the details where  external micro controller can communicate with H-Bridge ( especially with driver point of view). what ever manual obtained of 13 pages  and some other having insufficient data. please share indetail user guide document.

3.Please share videos of DRV8703 q1 evm for brushed motor application videos where complete configuration and also based on application changing settings, which are required since this EVM can use for 4-wire stepper motor .

4. Please try solve above querries by using  DRV8703 q1 evm. If possible please try to simulate or run motor.

awaiting for your kind reply

Closing this thread and compiling your questions to new thread.

hi

I have downloaded ccs project files from the link you shared. when I am trying to import the same project wt ccs v8 version I am able to build the project and .out file is generating . but when I am trying to program using the usb -jtag cable ,emulator not getting initialised. Do i wanted to create a new target configuration file to run the code ? one existing file is der in project with that I m trying to program. Also in CCS while creating target configuration file we need to specify the emulator type like blackhauk or usb mezaanain etc. Here what emulator type i shud choose ?

Can you please try to help me for programming the code. It would be better if u can run the code and check is there any issue to initialize the emulator .

HI,
please try to resolve my following issues,
1.While connecting DRV8703 q1 evm board ,'NO USB FET was FOUND ' like this error was coming..i tried a lot methods which are suggested in forum and also in google but it was not solved.Please tell possible solution ( for windows 10 and CCS8.1.0).

2. Please share exact user guide or manual for DRV8703 q1 evm..where all status led indication purpose details , jumper setting cases and also give the details where external micro controller can communicate with H-Bridge ( especially with driver point of view). what ever manual obtained of 13 pages and some other having insufficient data. please share indetail user guide document.

3.Please share videos of DRV8703 q1 evm for brushed motor application videos where complete configuration and also based on application changing settings, which are required since this EVM can use for 4-wire stepper motor .

4. Please try solve above querries by using DRV8703 q1 evm. If possible please try to simulate or run motor.

awaiting for your kind reply
regards,
vasanth