DRV8302: DRV8302 Three Phase Gate Driver With Dual Current Shunt Amplifiers and Buck Regulator – Hardware Controlled datasheet (Rev. C)

DIVYA GOUDA

Part Number: DRV8302

hello Sir

in the typical application block diagram mentioned in page number 21 of the article mentioned above i want to know more about the MCU. is only ADC is used or other blocks are also used in the connection?

it would be helpfull if i get more information about it

thanking you,

Divya

over 7 years ago

0 Wang5577 over 7 years ago

TI__Guru 56650 points

Divya,

The page 21 figure 6 shows the MCU function blocks are used to control DRV8302.
If you want to get more info, please check "Three Phase BLDC & PMSM Motor Kit with DRV8302 and Piccolo MCU" (www.ti.com/.../drv8302-hc-c2-kit)

0 DIVYA GOUDA over 7 years ago in reply to Wang5577

Intellectual 290 points

i want to know about MCU. Please help me out by providing the information.

i want to know which MCU is better for this application of BLDC

0 DIVYA GOUDA over 7 years ago in reply to DIVYA GOUDA

Intellectual 290 points

instead of MUC can i use some thing else?

0 Wang5577 over 7 years ago in reply to DIVYA GOUDA

TI__Guru 56650 points

Divya,

MCU should be good for controlling DRV8302. DRV8302-HC-C2-KIT (Three Phase BLDC & PMSM Motor Kit with DRV8302 and Piccolo MCU) use C2000 family MCU part to control DRV8302.
TI has different team support MCU. To view all available motor control tools, visit the C2000 Tools and Software page.
When you have a question with MCU, you can google search or TI search that part number e2e forum. And then, you can post your question to that e2e forum.

Motor drivers

Motor drivers forum

DRV8302: DRV8302 Three Phase Gate Driver With Dual Current Shunt Amplifiers and Buck Regulator – Hardware Controlled datasheet (Rev. C)