DRV8832: DRV8832 FAULTn output pullup

wolfgang kopp

Part Number: DRV8832

Dear TI Support Team,

is it possible to pull the FAULTn pin to 24V with a 10k pullup resistor?

Best regards,

Wolfgang

0 Wang5577 over 6 years ago

Wolfgang,

No, the DRV8832bAbsolute Maximum voltage is 7V. So, the pull-up source voltage should be lower than 7V.

0 wolfgang kopp over 6 years ago in reply to Wang5577

thanks for the fast answer!

Best regards,

Wolfgang

Motor drivers forum