• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 925 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DRV8833: Does this part have an internal PWM generator?

DRV8833: Ok to parallel more than 2 drivers?

johny radio
Expert 1060 points
Part Number: DRV8833

Can current output be increased by paralleling any number of these drivers?

thx

  • 0
    TI__Genius 14487 points

    Hi Johny,

    You can parallel the outputs on this driver as shown in Figure 7 of the datasheet. However, you cannot parallel the outputs of multiple ICs together. Any differences in timing between the input and output will cause a shoot through condition between the two devices.