Drv8432 evaluation board

fausto dalla vecchia

Prodigy 30 points

Other Parts Discussed in Thread: DRV8412

Hello, I wish to know where to buy the evaluation board for Drv8432 and the price...

there is someone that try this object ?

thank you

over 14 years ago

0 Michael Firth over 14 years ago

TI__Expert 3115 points

Hi Fausto,

We have not yet released the DRV8432 EVM, but did just recently release the DRV8412-C2-EVM which is identical to the DRV8432, except is lower current & no heat sink required (2x Brushed DC motors @ 3A continuous / 6A peak). I hope to have the DRV8432 EVM released by the end of the year, January latest. (see attached comparison slide)

You can order the DRV8412 EVM at: http://focus.ti.com/docs/toolsw/folders/print/drv8412-c2-kit.html ($199)

What project are you thinking about using the DRV8432 in?

Thanks,

Mike

Device Selection Guide.ppt

0 fausto dalla vecchia over 14 years ago in reply to Michael Firth

Prodigy 30 points

Hi Mike,

thanks for your answer...

We are working on a new Cnc and we are looking for drivers to mount on the board, instead to use external drivers, to move 3 stepper motors

I think we can use the DRV8432 but the customer ask us to have the possibilities to check at least one driver with his motor

before the start with the project and I think the evaluation board it's a simple solution for this request

regards

Fausto

0 Don Dapkus over 14 years ago in reply to fausto dalla vecchia

TI__Guru**** 189401 points

Fausto,

You can try contacting your local TI sales office and see if they can get you a DRV8432 EVM.

-d2

0 fausto dalla vecchia over 14 years ago in reply to Don Dapkus

Prodigy 30 points

hello,

about two month ago I ask for the evaluation board for Drv8432 but it was not ready yet ...

now for us it's time to design the our board,

it's avaiable the DRV8432-EVM ?

we wish to do some test before the beginning with the design and the board will help us a lot

thank you

Fausto

Motor drivers

Motor drivers forum

Drv8432 evaluation board