• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 564 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Sensorless motor drive solution

Tomohiro Nagasawa58
Expert 1570 points

Other Parts Discussed in Thread: DRV8305-Q1, DRV8343-Q1, DRV8343S-Q1EVM, DRV8305-Q1EVM

Dear support team

I want to suggest sensorless motor drive solution for my customer.

I found DRV8305-Q1 + MCU solution

Could you teach recommended parts?

■Spec

・Automotive grade

・400W output ( 12V about 40A)

・Sensorless drive

Regards

Tomohiro Nagasawa

  • 0
    TI__Intellectual 2595 points
    Hello Nagasawa-san,

    For 12V automotive systems, the DRV8305-Q1 is likely the best device. However, depending on the minimum operating voltage required by the system, your customer may be able to use DRV8343-Q1 as well.

    Both of these devices are gate drivers that use external MOSFETs, so the choice of external MOSFET will be largely responsible for the current capacity of the system.

    Both of these devices are capable of supporting sensorless drive, and the EVMs for the devices can demonstrate this. The DRV8305-Q1EVM uses a C2000 MCU to perform sensorless FOC control, while the DRV8343S-Q1EVM uses an MSP430 MCU to perform sensorless trapezoidal control.

    Thanks,
    Garrett