DRV2605L: Specifications for LRA Load

Sadanori Kato

Part Number: DRV2605L

Hi,

Could you please tell me the recommended reactance range for LRA if DRV2605L is used with LRA load ?
In addition, please tell me the LRA which can be used by DRV2605L.

Best regards,
Kato

over 6 years ago

0 Luis Fernando Rodriguez S. over 6 years ago

TI__Guru* 84915 points

Hello, Kato-san,

You may find the list of our LRA vendors in this link:

http://www.ti.com/motor-drivers/actuator-drivers/actuators.html

Usually, all their LRA actuators can be used with the DRV2605L, but we can recommend the BVW-1034 from Bluecom. This actuator is normally included in the BOM of our EVMs.

BVW-1034 Spec(180907).pdf

Regarding the recommended reactance range, usually this parameter is not specified for the acceptable LRA. But the DRV2605L works fine with LRA with resistance around the 12ohms +/-20%.

Best regards,
Luis Fernando Rodríguez S.

0 Sadanori Kato over 6 years ago in reply to Luis Fernando Rodriguez S.

Guru 36540 points

Hi Luis-san,

Thank you for your prompt reply.

I understood and will contact you if I get additional questions from our customer.

Best regards,
Kato

Motor drivers

Motor drivers forum

DRV2605L: Specifications for LRA Load