This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/BOOSTXL-DRV8323RS: Can't spin motor with BOOSTXL-DRV8323RS and MSP430

Part Number: BOOSTXL-DRV8323RS
Other Parts Discussed in Thread: DRV8323, MSP430F5529, DRV832X

Tool/software: Code Composer Studio

Hi technical support team.

I've just received my BOOSTXL-DRV8323RS and MSP430 and set them up with my BLDC motor by consulting BOOSTXL-DRV8323Rx EVM User’s Guide,

I sucessfully uploaded the DRV832X_MSP430F5529_Trapezoidal_Sensorless_BLDC firmware to MSP430 board. And, using the BOOSTXL-DRV832X EVM GUI, I'm good with trying modify DRV8323's internal registers (SPI).

The problem is, I cannot spin the BLDC motor at all, increase the motor's speed to about 40-60% results in: the motor makes TICK sound (and a small movement) and it triggers Over Current fault message (and indicator LED).

My BLDC motor is "2312A Brushless Motor for DJI Phantom 3 Pro" (used for quadrotor)