• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 406 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8323: SPI communication with ST’s MCU STM32F302VC

Takuya Terada
Expert 5115 points
Part Number: DRV8323
Other Parts Discussed in Thread: DRV832X

Hi team,

STM32F302VC has TI mode for SPI communication.

 

I think this is not fit to DRV8323S. because datasheet said when NSS change, SCLK must be L.

However in TI mode, NSS and SCL change simultaneously.

 

Could you tell me which mode is suitable for DRV832x.

Best regards,

Takuya

  • 0
    TI__Guru 65240 points

    Takuya-San,

    I am not familiar with the STM32F302VC but you should follow the datasheet for the DRV832x. They might have a TI mode but it is not made by us so we cannot comment on their features.

    If you have issues with the SPI communication once following the datasheet guidance please let me know.

    Regards,

    -Adam