DRV8800: Do you have some recommendation devices for 12v to 60v(180v, 10W) full bridge design

Frank Xiao

Genius 12055 points

Part Number: DRV8800
Other Parts Discussed in Thread: DRV8844

Hi team,

My customer wants to use the DRV8800 to do a full-bridge converter design. But it usually meets Flault. Do you have some recommendation devices for 12v to 60v(180v, 10W) full bridge design? Thanks.

over 5 years ago

0 Wang5577 over 5 years ago

TI__Guru 56650 points

Frank,

The voltage infomation is conflict between 12v to 60v and 180V. Do you mean 12v to 60v output; 180v input?

0 Frank Xiao over 5 years ago in reply to Wang5577

TI__Genius 12055 points

Hi Wang,

12v to 60v or 12v to 180v, the power is 10W. Thanks.

0 Wang5577 over 5 years ago in reply to Frank Xiao

TI__Guru 56650 points

Frank,

We don't have 12V to 180V device.

For 12V to 60V device, would you check DRV8844 to see if it can meet your requirement or not?

Motor drivers

Motor drivers forum

DRV8800: Do you have some recommendation devices for 12v to 60v(180v, 10W) full bridge design