any one can support a wave bin file to generate 36V 50Hz?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
please refer to the document: slou502a (https://www.ti.com/lit/pdf/slou502)
page 14 introduces how to create the wave and then you can export it as a bin file.
i generate an wav with the below settings:
( it seems I can't upload the bin file here. but I think you can generate it yourself. if you still have issue to go this, please let me know.
the frequency can not be the exact 50Hz, you can select a value near it( the frequency is usually 100Hz~200Hz).
regarding the voltage level, it is related to the gain setting.
28.8 dB, 50 Vpp •
34.8 dB, 100 Vpp •
38.4 dB, 150 Vpp •
40.7 dB, 200 Vpp
then set the percentage to get 36V
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.