• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 285 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8908-Q1: Could you tell me the resistance of internal pull-down at nSLEEP pin?

Soichi Nishimura
Expert 5215 points
Part Number: DRV8908-Q1

Hi team,

I have a question to DRV8908-Q1.

Could you tell me the resistance of internal pull-down at nSLEEP pin?

Regards,

Nishimura

  • 0
    TI__Guru 55615 points

    Nishimura-san,

    This can be calculated based on the specified Input Logic High Leakage current on page 15 in the datasheet.

    Max current @ 3.3V is 74uA.  This equates to a resistance of 44k ohms.  Typical leakage is 34uA.  This equates to ~97k ohms.