• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 245 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ28Z610: Getting started collateral and instructions

Ue
Genius 17165 points
Part Number: BQ28Z610
Other Parts Discussed in Thread: BQSTUDIO

Hi all

My customer has a 2S2P battery pack with a capacity of 7Ah and they are evaluating the 

BQ28Z610 Battery fuel gauge with integrated protector for 1-2 series packs

Can you provide instructions as to what they should do for getting started ?

What is the collateral they should consult and the tools they should use ?

Thank you and best regards

Ueli

  • +1
    TI__Guru** 105760 points

    Hello,

    They will need to run the learning cycle for the gauge to accurately calculate SOC. The steps can be found in SLUA903.

    The EVM users guide covers the hardware setup and calibration which should be done first.

    1: Follow EVM users guide for bqStudio interface examples and how to attach hardware and do a calibration.

    2: Run the learning cycle following SLUA903.

    3: Configure your protections and other dataflash settings for the application.

    4: Export final golden image for programming other gauges.

    Sincerely,

    Wyatt Keller

  • 0 in reply to Wyatt Keller
    TI__Genius 17165 points

    Hello Wyatt

    Thank you for these instructions, I appreciate your support.

    Best regards

    Ueli