This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC21750: UCC21750

Part Number: UCC21750


I am using UCC21750 gate driver in one of my application. I didnt get the tina simulation file, so I downloaded the Pspice file and started simulating in Pspice for TI.

The tool response is too bad and not able to connect the two connections (wires properly). It is very difficult to make the connections.

The error i found during the simulation is "The part/device cannot be simulated. No PSpice template found on U1, ignoring this part/device from simulation netlist."

Please share the proper simulation file of UCC21750 (Tina model).