UCC28600EVM-65W: TINA TI Simulation

Catur Nugroho

Prodigy 60 points

Part Number: UCC28600EVM-65W
Other Parts Discussed in Thread: UCC28600,

Hello E2E forum,

I currently trying to do simulation of UCC28600 using TINA TI based on UCC28600EVM-65W parameter.

The attached below were my simulation model,

the problem is by using the same parameter, the simulation won't give the right result.

Can anyone help me in this matter?

Regards,

Catur

over 4 years ago

0 Catur Nugroho over 4 years ago

Prodigy 60 points

65W-18V.TSC

+1 Jaden Ning over 4 years ago in reply to Catur Nugroho

TI__Expert 7080 points

Hi Catur,

Thanks for your interesting in TI's part .

Since UCC28600EVM and it's parameters can normal operating , so I think there is must something wrong on your configuration of TINA. here are some training material of TINA from TI.COM . hope this can help you. if you have any question on how to use or design UCC28600 , please feel free to create a new post.

https://training.ti.com/search-catalog/categories/tools-software?keywords=TINA&start%5Bdate%5D=&end%5Bdate%5D=

Thanks.

Power management

Power management forum

UCC28600EVM-65W: TINA TI Simulation