Hi,
Good Day. Can you help our customer to choose which LED drivers that can be compatible with the LED light bars on the link below. Thank you very much.
Best Regards,
Ray Vincent
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Good Day. Can you help our customer to choose which LED drivers that can be compatible with the LED light bars on the link below. Thank you very much.
Best Regards,
Ray Vincent
Hi Frank,
Good Day. I'm little confuse on your response. Please help me to elaborate on what do you want to know on the customer's query. Thank you very much.
Best Regards,
Ray Vincent
I don't know how to help you if you only offer a LED spec to me. Can you get the whole system information to me.
Hi Frank,
Customer wants a LED driver that is compatible to the LED light bars that I send to you via link. The link is the datasheet of the LED light bars.
https://www.digikey.com/en/products/detail/lumex-opto-components-inc/SSA-LXB525SRD/144750
https://www.digikey.com/en/products/detail/broadcom-limited/HLMP-2550/637512
He wants to control 5 to 6 LED bar using TI devices, is there any TI devices that are compatible on the said LED light bars.
Thank you very much.
Best Regards,
Ray Vincent
OK Please help to answer the below question to find the solution:
1. the end equipment of this device?
2.the how many channel customer are needed?
3.the LED Vf and If of each channel?
4.whether they need digital interface to control the brightness? and how could they control the dimming?
5.whether they need fault detect function?
Please get those basic information from customer thanks.