TPS65132S: Wait time after I2C setting

Takashi Yamaguchi

Part Number: TPS65132S

Hi team,

I have a question about the TPS65132SYFF.

After setting I2C, how long "wait time" is required before EN is set to High? Or could you tell me how long it takes for the I2C setting to be reflected? The customer wants to know how long it takes for I2C to be reflected.

Regards,

Yamaguchi

over 2 years ago

0 Liaqat Khan over 2 years ago

TI__Mastermind 18550 points

Hello Yamaguchi-san,

I reviewed the datasheet and there is no specification for time between I2C command to change output voltage and the actual change of voltage. I can measure a typical value under nominal conditions in the lab and report it to you by tomorrow.

Kind Regards,

Liaqat

0 Takashi Yamaguchi over 2 years ago in reply to Liaqat Khan

TI__Genius 11060 points

Hello Liaqat-san,

Thank you for your support. I look forward to the test result. The customer needs the answer by 6/16(Japan time), so it's helpful if you could report it to me by 6/15(your time).

Regards,

Yamaguchi