UC2906(bq24450) charger problem

Artem Seynov

I make charger for 12V 3X3.4Ah(in parallel) FIAMM Batterys. I have one problem. Charger doesn't pass from Overcharge to Float mode.

over 13 years ago

0 Artem Seynov over 13 years ago

Prodigy 20 points

The problem is solved. Probably I very much hurried up. After 6 hours of charging the charger has passed in a float mode. I have measured a current consumed by the switching device. It only 0.020A.

Power management

Power management forum

UC2906(bq24450) charger problem