• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 155 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25600D: schematic diagram of BQ25600DYFFR review

Jimmy Huang
Genius 3525 points
Part Number: BQ25600D

Hi TI expert：

Our project will use charging IC BQ25600DYFFR with MT6371 for fast charging,

1. Please confirm whether this IC can adapt to MT6371 for fast charging scheme?

2. When using BQ25600DYFFR with MT6371 for fast charging，how to realize it by software?

3. Please help to check the accessory circuit, if there is any problem, please put forward in time, thank you.

BQ25600DYFFR.pdf

  • 0
    TI__Guru** 105760 points

    Hello Jimmy,

    I'm not familiar with the MT6371, you will need to evaluate if the charger will be compatible with your system, do you have any specific questions regarding the charger that we could help with?

     It also looks like you need to increase your capacitance on REGN to 4.7uF. I would also make sure your pull-ups are high enough voltage for the logic high to be sensed.

    Sincerely,

    Wyatt Keller