• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 124 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM84424: TurboTrans Resistor Design

KARTHIK KRISHNA JAYACHANDRAN
Intellectual 370 points
Part Number: TPSM84424

While designing TurboTrans Resistor should I be including the total output capacitance?

How much tolerance can I take for TurboTrans Resistor? What is the current rating that I should consider for designing TurboTrans Resistor?

Can I have reference documents or links for training video on TurboTrans technology?

  • +1
    TI__Mastermind 46040 points

    Hi Karthik,

    Yes, while designing TurboTrans resistor, you need to include effective output capacitance(consider capacitor's derating), output voltage and KTT value. Please refer to datasheet 7.3.7 section for detail. The RTT resistor tolerance should be 1% 0603 package. The good reference document is EVM user's guide.

    Thanks,

    Nancy