• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 61 subscribers
  • Views 1303 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] How do I configure the TPS25750 and flash the EEPROM with the output binary for the board USB-PD-CHG-EVM-01?

Michael Emanuel35
Mastermind 29945 points
Part Number: USB-PD-CHG-EVM-01
Other Parts Discussed in Thread: TPS25750,

Open the TPS25750 Application Customization Tool and …

  • Select all of the desired PD controller and charger parameters.
  • Select “Download Full Flash Binary.”
  • Power the USB-PD-CHG-EVM-01 and flash the binary using an Aardvark by Total Phase on J5. See the below links to the Aardvark and Flash Center from Total Phase.

https://www.totalphase.com/products/aardvark-i2cspi/

https://www.totalphase.com/products/flash-center/

  • Alternatively, remove all power from the EVM completely and flash the binary using the below Amazon solution:
  • Amazon Solution Link