LM4040: Wash compatibility

Hi Jude,

The only material content document that I can find for the parts are shown by clicking on the links:

https://www.ti.com/materialcontent/en/report?pcid=205983&opn=LM4040AIM3-2.5/NOPB

https://www.ti.com/materialcontent/en/report?pcid=36834&opn=REG102UA-3.3/2K5

https://www.ti.com/materialcontent/en/report?pcid=36675&opn=REF5025AIDR

https://www.ti.com/materialcontent/en/search?partType=tiPartNumber&partNumber=LMZ14202TZ-ADJ/NOPB

https://www.ti.com/materialcontent/en/search?partType=tiPartNumber&partNumber=LMZ14201TZE-ADJ/NOPB

Ben

Hi Ben,

I have been going through other forums related to wash process compatibility and I am wondering if this answer is applicable to most TI IC packages.

This is the forum link as a sample.

https://e2e.ti.com/support/isolation-group/isolation/f/isolation-forum/953928/sn6501-q1-components-for-washing-process?tisearch=e2e-sitesearch&keymatch=wash#

There is also a document being specified [ AN-2029 Handling & Process Recommendations (SNOA550H) ] which talks about the PCB assembly cleaning on section 11.

Jude

Hi Jude,

Please follow what is written in that document.  Thank you for bringing that document to my attention.  

Ben

I appreciate the confirmation. Thanks again.

Anytime Jude!

Ben