• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 182 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM5D1806: tpsm5d1806 sync pin connection in dual and parallel output mode

sandeep kare
Prodigy 30 points
Part Number: TPSM5D1806

  sync pin needs clock source matching switching frequency requirement from external source or it can be left open?

  • 0
    TI__Expert 5310 points

    Hello,

    The Sync pin may be left open in a standalone configuration. The sync frequency must be within +/-20% of the internal oscillator's frequency if you are synchronizing the device to an external clock. The internal oscillator frequency is set by the resistors on the MODE2 pin.

    Regards,

    Alec Biesterfeld